Generic Vision Encoder Calibration Plate for Bambu Lab H2D / H2S / H2C

Generic Vision Encoder Calibration Plate for Bambu Lab H2D / H2S / H2C

Overview
An optical encoder plate used to calibrate XY motion on supported Bambu Lab H2 series printers. It carries a dense grid of encoded markers that the printer's vision system reads, so the machine can correct for belt looseness, mechanical variation and wear. The result is more accurate dimensions across the whole build area, which helps most on large prints and parts that must fit together.

Key Features

• Matrix of encoded markers read by optical measurement for XY motion calibration

• Supplier states calibration to better than 50 µm, using 5 µm-resolution optical measurement

• Accuracy is not tied to print size, so it suits large functional parts

• Works with Bambu Studio's Auto Hole-Contour Compensation for better part fit

• Calibration takes about 5 minutes

Compatibility

• Bambu Lab H2D

• Bambu Lab H2S

• Bambu Lab H2C

•  

How to Use

1. Place the plate on a clean heatbed at room temperature

2. Run the calibration routine

3. Remove the plate when calibration finishes

4. Put your normal build plate back before printing

Important
This is a calibration tool only. Do not use it as a build plate.

This is a generic accessory and is not an original Bambu Lab product.

Bambu Lab is a trademark of its respective owner and is used only to indicate compatibility.