Original Energetic PEI Smooth/Textured Build Plate for Bambu Lab X1C/P1P/A1

ENERGETIC For Bambu Lab x1 Build Plate Upgrade Textured PEI Pro Magnetic Spring Steel Sheet 257x257mm for P1P 3D Printer Hot Bed

BILLION DOLLOR QUESTION :

WHY GO WITH ENERGETIC BED OVER BAMBU LAB ?

- Energetic Bed plates are made with high quality spring steal sheet

- High adessive and reusability

- 2mm Thickness over any other bed plates

- Last forever with high quality prints

Advantage:

Upgrade Textured PEI Pro:Ultra adhesion(way better than PEI), ultra durable, lower working temp than PEI,0.5MM bare thickness spring steel sheet, stronger magnetism.

Size: 257.5 x257.5mm/10.14x10.14inch PEI Build Plate is suitable for Bambu Lab X1 and similar size 3D printers. Perfect for PLA, PEEK, ABS,PETG ect

Stronger Magnetic Ddhesion:PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.ENERGETIC upgrade PEI bed platforms had solid adhesion and the print went well.

Easy Print Removal: PEI 3d printer platformis flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.

Easy to Install:PEI spring steel sheet is flat and flexible, it comes without magnetic base, but could be magnetically attracted to the hotbed,becauseBambu Lab X1 3D printer heated bed is magnetic, just put and print.

Easy to Clean:PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.

Items Included:

Product1:Textured and Smooth-double side textured and smooth PEI ,double side can print.

Recommend print temps

• PLA – 60C

• HTPLA – 60C

• PETG – 70-80C

• PCTG – 70-80C

• ABS – 100C

Product Usage Guidelines

• PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

• Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface