Bambu ABS-GF - Black - with Bambu Reusable Spool
Overview
Glass fibre reinforced ABS filament that is stronger, stiffer and more heat resistant than regular ABS, with less warping. The glass fibre gives a fine matte finish that makes layer lines almost invisible, while keeping ABS's water resistance and durability. Suited to functional parts such as enclosures, connectors and moulds, as well as decorative pieces.
Key Features
Higher strength and stiffness for load-bearing and bend-resistant parts
Better dimensional stability and less warping than standard ABS
Fine matte finish with nearly invisible layer lines
Good water resistance and durability
Supplied on a high-temperature reusable spool
Diameter 1.75 mm ± 0.03 mm
Print settings stored on the spool RFID tag for AMS use
Specifications
Colour: Black
Net weight: 1 kg
Nozzle temperature: 240 - 270 °C
Bed temperature: 80 - 100 °C (with glue)
Print speed: below 180 mm/s
Drying: 80 °C for 8 hours
Density: 1.08 g/cm³
Heat deflection temperature: 99 °C
Tensile strength: 36 MPa
Bending modulus: 2860 MPa
Impact strength: 14.5 kJ/m²
In the Box
Filament on reusable spool x 1
Desiccant x 1
Filament label x 1
Compatibility
AMS 2 Pro, AMS HT and AMS compatible
NOT compatible with AMS lite
NOT compatible with 0.2 mm nozzles
Hardened steel nozzle required (0.4 mm, 0.6 mm recommended, or 0.8 mm); stainless steel nozzles are not recommended
An enclosed printer is required
Engineering Plate, High Temperature Plate or Textured PEI Plate recommended; Cool Plate not recommended
Dry the filament before use
Bambu Lab is a trademark of its respective owner and is used only to indicate compatibility.